Product List
Dixie Drinks
Discount Coin & Bill Equipment
To contact us:
  1-770-962-8363
dixiedrinks2000@yahoo.com
Coinco MAG50B Bill Acceptor

This is a Coinco MAG50B dollar bill Acceptor. the unit accepts all of the old currency {$1, 5, 10, 20}.

We can upgrade this unit to accept all new larger denomination currency for an additional charge.

Price $55.00
Coinco Coin Mech 9370S

This is a Coinco Coin Mech 9370S. Replaces S759800, 3340S, 9340S. Direct replacement of any single price 117v mech. Will directly replace any 117V single price mech used with a bill acceptor, having the white six pin bill acceptor plug.

It has the connector harness to make it capable of connecting to a bill acceptor. This is the extra white plug shown in the picture. Will fit virtually all single price 115V drink machine with the large 8 pin Jones Plug. The plug has 8 large flat pins and one round locator pin for a total of 9 pins.

  • The price is adjustable of $.05 to $12.75 in 5 cent increments.
  • Accepts nickels, dimes, quarters and dollar coins.
  • It has nickel dime, quarter payout for making change.
  • Dollar coin acceptance can be switched on and off.

Price $60.00

Coinco 3341S

This is a Coinco 3341S single price electronic coin mechanism.

This has the connector harness to make it capable of connecting to a bill acceptor. This is the extra white plug shown in the picture.

This mech will fit virtually all single price 115V drink machines with the large 8 pin Jones Plug. The plug has 8 large flat pins and one round locator pin for a total of 9 pins.

  • Pricing is adjustable from $.05 to $3.15 in 5 cent increments.
  • Accepts nickels, dimes, quarters and dollar coins.
  • It has nickel, dime, quarter payout for making change.

Price $60.00
Mars TRC 6800H

This is a Mars TRC 6800H single price electronic coin mechanism. This unit will directly replace the following coin mechanisms. Coinco 3340S, Coinco 3341S, Coinco 9340S, Coinco 9370S, Coinco S759800A and B and other  single price 117V coin mechanisms.

It has the connector harnesses to make it capable of connecting to both standard and non standard bill acceptors. These are the extra white plugs shown in the picture.

This mech will fit virtually all single price 115 volt drink machines with the large 8 pin Jones Plug.  The plug has 8 large flat pins and one round locator pin for a total of 9 pins.

  • Price is adjustable from $.05 to $12.75 in 5 cent increments.
  • Accepts nickels, dimes, quarters and dollar coins.
  • It has nickel, dime, quarter payout for making change.
  • Dollar coin acceptance can be switched on and off.

Price $60.00

National Cointron 3000 USV

This is a National Cointron 3000 USV. This mech will fit all vending machines having the rectangular twelve pin 117V plug. It is directly interchangeable with the Coinco 9300L, Mars MC5000 and Mars TRC6000.

  • Accepts nickels, dimes, and quarters.
  • Has nickel, dime, quarter payout for making change.

Price $40.00

Coinco 9302GX

This is a Coinco 9302GX MDB coin mechanism.

It has nickel, dime, quarter payout for making change and accepts nickels, dimes, quarters and dollar coins. Dollar coin acceptance can be switched on or off.

This unit will fit and work in all MDB (multi drop bus) applications on all vending machines.

The 9302GX has the reputation of being the simplest, most reliable MDB mech ever produced.

It uses the small white plastic six pin plug as shown in the picture.



Price $60.00
Coinco 3340S
This is a Coinco 3340S single price electronic coin mechanism.

The price is adjustable from $.05 to $3.15 in 5 cent increments.

It has nickel, dime, quarter payout for making change and accepts nickels, dimes, quarters and dollar coins. It also has the connector harness to make it capable of connecting to a bill acceptor. This is the extra white plug shown in the picture.

This mech will fit virtually all single price 115 volt drink machines with the large 8 pin Jones plug. The plug has 8 large flat pins and one round locator pin for a total of 9 pins.

This unit has been bench tested and is in fine working condition.

Price $60.00
Coinco S759800A

This is a Coinco S759800A single price coin mechanism.

The price  is adjustable for $.05 to $.75 in 5 cent increments.

It has nickel payout for making change and accepts nickels, dimes and quarters.

This mech will fit virtually all single price 115 volt drink machines with the large 8 pin Jones plug. The plug has 8 large flat pins and one round locator pin for a total of 9 pins.

The only exception I can think of is the very early (early 50's) reverse wired ChoiceVends, and it can be rewired to fit those if desired.

This unit has been bench tested and is in fine working condition.


Price $75.00
Quantum

This is a Coinco Quantum MDB Coin Mechanism.

It is a state of the art MDB electronic coin mech that accepts  nickels, dime, quarters and dollar coins& pays out nickels, dimes and quarters .

It will fit and work in all MDB (multi drop bus) applications.

Fully bench tested and in fine working condition.



Price $65.00
Vortex

This is a Coinco Vortex VTX100 MDB Coin Mechanism.

It is a state of the art MDB electronic coin mech that accepts  nickels, dime, quarters and dollar coins & pays out nickels, dimes and quarters . It has three large coin hoppers instead of coin tubes for maximum coin capacity.

It will fit and work in all MDB (multi drop bus) applications.

Fully bench tested and in fine working condition.



Price $65.00
Coinco BA30B Bill Acceptor

This is a Coinco BA30B dollar bill acceptor. The unit accepts all of the old currency ($1, 5, 10, 20) but currently has not been upgraded to accept the new currency.
It, of course, accepts all U.S. $1 bills.


Price $55.00
Coinco MAG30B Bill Acceptor

This is a Coinco MAG30B dollar bill acceptor, the unit accepts all of the old currency ($1, 5, 10, 20).

We can upgrade this unit to accept all new larger denomination currency for an additional charge.

Price $55.00
Conlux CCM5

This is a Conlux CCM5 MDB Coin Mechanism.

It is a state of the art 5 tube changer that accepts nickels, dimes, quarters, and dollar coins, and pays out nickels, dimes, and quarters.

It has a removable 5 tube magazine with 3 quarter tubes, one dime tube and one nickel tube.

It will fit and work in all MDB (multi drop bus) applications.

Fully bench tested and in fine working condition.

Price $75.00
Conlux CCM5 - Red Version

This is a Conlux CCM5 MDB Con Mechanism.

This version was orginally built for Coca Cola and uses some Red plastic parts instead of clear or grey. It is identical to other CCM5 changers except for the color of the plastic. All parts are interchangable with the grey units.

Removable 5 tube magazine with 3 quarter tubes, 1 dime tube, and 1 nickel tube.

Accepts: nickels, dimes, quarters and dollar coins and pays out nickels, dimes & quarters. Works in all MDB applications.

Fully bench tested & in fine working condition.

Price $75.00
Mars TRC6510

This is a Mars TRC 6510 MDB coin mechanis.

It has nickel, dime, quarter payout for making change and accepts nickels, dimes,  quarters and dollar coins. Dollar
coin acceptance can be switched on or off.

This unit will fit and works in all MDB (multi drop bus) applications on all vending machines.

It uses the small white plastic six pin plug as shown in the picture.

Price $60.00
Mars TRC6512

This is a Mars TRC 6512 MDB coin mechanism.

It has nickel, dime, quarter payout for making change and accepts nickels, dimes, quarters and dollar coins. Dollar
coin acceptance can be switched on or off.

This unit will fit and work in all MDB (multi drop bus) applications on all vending machines.

It uses the small white plastic six pin plug as shown in the picture.

Price $60.00


.
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK
OUT OF STOCK